Schnell Technology

GTM can produce round cages with welded spirals. The pitch may be pre-set. It is equipped with payoff, dial for the longitudinal bars, hydraulic cage supports, 1 fixed and 1 mobile bored plates, electronic console to control plate rotation.

Technical data:

GTM xp, like GTM, produces cylindrical and prismatic poles with welded spiral and programmable pitch, but thanks to equipment with a set of servomotors, the new monobloc structure and other major innovations, it is a more flexible, faster, safer, innovative and transportable machine.
It is equipped with payoff, dial for the longitudinal bars, hydraulic cage supports, 1 fixed and 1 mobile bored plates, electronic console to control plate rotation.

Technical data:

Shaped bars assembling plant producing structural meshes, meshes on request, baffles, wall septum, elements for plinths. Allows the production of flat wire mesh as well as meshes with profiled rods on one or both sides.
Multi Assembler is fully modular and characterised by very short setup times for both diameter and format changes of the mesh produced. These characteristics guarantee high flexibility and make the plant particularly suitable for the production of small and very small batches of wire mesh.

Technical data:

IDEA assembles cages by means of the patented 'Schnell System' (Patented): using three thin longitudinal wires ,which may be welded to any point of the stirrup's exterior surface IDEA is able to half-assemble lattice girders of stirrups of any shape and size.
Its operation is extremely simple: stirrups are fed; next they are welded to the three longitudinal wires by the welding clamps; the whole girder is made to slide forward while its motion is previously set by the computer and may be constantly checked.The half-assembled girder is now ready to be finished off by fixing the frame carrying bars. As the stirrups have already been welded at the correct distance, the carrying bars may be only tied every 5 or 6 stirrups.

This means:
>saving up to 60% on assembling costs;
>maximum flexibility: girders may be assembled with stirrups of any shape and size. Besides this system avoids all size restrictions and material waste involved with the use of electrowelded mesh;
>high quality standards: the girders obtained with this system are far more precise and stiff than their traditional counterparts and they do not face any risk during transport.

Technical data: