Shaping centres

Friday, 26 March 2010 11:23

Automatic rebar bending station with no. 1 bending unit, able to bend automatically in 1 direction and manually in 2 directions, it is perfect for those who have a considerable quantity of bars bent to one only side or for those who have to process very short pieces bent to both sides. It is equipped with wide feeding track consisting of motorised and rubber-coated rollers, bar loaders and unloaders, one stop plate to array the bars, mobile clamp on the horizontal arm, bar lifting platforms, operation by means of servomotors, ejection cylinder to remove the tools from the toothed part.
Capacity with mandrel-backstop: n° 1 bar Ø 40mm; n° 2 bars Ø 36mm.

Technical data:

MONOROBOT 60 Servo
Capacity with formers (optional):
	2 bars	Ø 32 mm	#10
	4 bars	Ø 26 mm	#8
	5 bars	Ø 20 mm	#6
Capacity with mandrel:
	1 bar	Ø 40 mm	#14
	2 bars	Ø 36 mm	#11
	4 bars	Ø 26 mm	#8
	5 bars	Ø 20 mm	#6
Max.bending angle:	180°		180°
Max. bending speed:	72°/sec		72°/sec
Average power consumption:	2 kWh		2 kWh

Add new comment

Roboclassic

Friday, 26 March 2010 11:15

The automatic bending robot mod. RoboClassic allows the making of shapes or stirrups of any kind. It shapes with positive bends on both sides can automatically and simultaneously be produced.
It is equipped with wide feeding track consisting of motorised and rubber-coated rollers, bar loaders and unloaders, 2 bending units, one fixed and one mobile2 bending units, one fixed and one mobile, one stop plate for zeroing the bars for each bending unit,
Capacity with mandrel: n° 1 bar Ø 40mm; n° 2 bars Ø 32mm.

Technical data:

ROBOCLASSIC 45
Capacity with mandrel:
	1 bar	Ø 40 mm	#11
	2 bars	Ø 32 mm	#9
	4 bars	Ø 20 mm	#6
	5 bars	Ø 16 mm	#5
Max.bending angle:	180°		180°
Max. bending speed:	34-50°/sec		34-50°/sec
Max. bending displacement speed:	45 m/min		140 ft/min
Average power consumption:	3 kW/h		3 kW/h

Add new comment

Robomaster 60 Servo

(1 vote, average 1.00 out of 5)

Tuesday, 23 March 2010 12:39

The Robomaster shaping centres allow fully automatic 4- directions bending and the production of any type of shapes, including those with positive and negative bends. Moreover, the bar holding clamps allow independent operations of the two bending units assuring save of time during the production of shapes. It is equipped with wide feeding track consisting of motorised and rubber-coated rollers, bar loaders and unloaders, 2 bending units, one fixed and one mobile2 bending units, one fixed and one mobile, one stop plate for zeroing the bars for each bending unit, ejection cylinder to remove the tools from the toothed part, operation by means of servomotors.

Capacity with split formers: n° 1 bar Ø 40mm; n° 2 bars Ø 32mm.
Capacity with mandrel (optional): n° 1 bar Ø 50mm; n° 3 bars Ø 32mm.

Technical data:

ROBOMASTER 60 Servo
Capacity with formers:
	1 bars	Ø 40 mm	1 bar	#11
	2 bars	Ø 32 mm	2 bars	#10
	4 bars	Ø 26 mm	4 bars	#8
	5 bars	Ø 20 mm	5 bars	#6
Capacity with mandrel (optional):
	1 bar	Ø 50 mm	1 bar	#14
	3 bars	Ø 32 mm	2 bars	#11
	4 bars	Ø 26 mm	3 bars	#10
	5 bars	Ø 20 mm	4 bars	#8
			5 bars	#6
Max.bending angle:	180°		180°
Max. bending speed:	72°/sec		72°/sec
Max. bending displacement speed:	56 m/min		185 ft/min
Average power consumption:	4 kW/h		4 kW/h