|
Friday, 26 March 2010 12:19 |
|
Dual direction stirrup bender to process both hot and cold-drawn steel in coils.
Driven by electrical servomotors, Prima 8 can boast the features described below: speed, reduced power consumption, minimum noise production, it is extremely reliable and consequently maintenance is very inexpensive. Prima 8 is indicated for different uses on top of the traditional rebar processing. Its precision in the processing of very small diameters (down to Ø 3,5 mm - #2), allows the use of this machine in sectors where, reduced spaces, require a high precision during processing.
Technical data:
| PRIMA 8 |
|
|
|
| Single strand up to: |
4 ÷ 8 mm |
|
#2 ÷ #3 |
| Double strand up to: |
4 ÷ 6 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
16 ÷ 32 mm |
|
5/8" ÷ 1 1/4" |
| Max pulling speed: |
110 m/min |
|
360 ft/min |
| Max bending speed: |
1450°/sec |
|
1450°/sec |
| Bending distance: |
1440 mm |
|
4'-8" |
| Average power consumption: |
2 kW/h |
|
2 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Last Updated on Friday, 26 March 2010 12:25 |
|
91
(2 votes, average 4.00 out of 5)
|
Friday, 26 March 2010 12:16 |
|
Bidirectional automatic stirrup benders to process hot-rolled or cold-drawn coiled wire. They are operated by electric servomotors and they can produce stirrups and cut-to-size bars from wires of ø 12 mm or double ø 10 mm (Prima R). These are the first machines any rebar shop should be equipped with.
Technical data:
| PRIMA 12 R |
|
|
|
| Single strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Double strand up to: |
6 ÷ 10 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 50 mm |
|
3/4" ÷ 1 31/32" |
| Max pulling speed: |
95 m/min |
|
310 ft/min |
| Max bending speed: |
1450°/sec |
|
1450°/sec |
| Bending distance: |
1500 mm |
|
4'-11" |
| Average power consumption: |
3 kW/h |
|
3 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Friday, 26 March 2010 12:10 |
|
This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 12 mm or double Ø 10 mm. Its main features are the wide front panel and the two servomotors on the driving unit which permit the machine to work at a maximum speed of 144 m/min.
Formula can produce a 200x200 mm stirrups in about two seconds which means 3,600 stirrups per hour with double wire.
Technical data:
| Formula HS |
|
|
|
| Single strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Double strand up to: |
6 ÷ 10 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 50 mm |
|
3/4" ÷ 2" |
| Max pulling speed: |
144 m/min |
|
475 ft/min |
| Max bending speed: |
1950°/sec |
|
1950°/sec |
| Bending distance: |
1650 mm |
|
5'-5" |
| Average power consumption: |
4 kW/h |
|
4 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Friday, 26 March 2010 12:05 |
|
This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 14 mm or double Ø 10 mm. Its main features are the wide stainless steel front panel and the two servomotors on the driving unit which permit the machine to work at a maximum speed of 144 m/min. It is equipped with a stirrup collecting flap, wire inlet unit, and Sapiens Technology which makes the straightening system completely automatic. Formula Sapiens can produce a 200x200 mm stirrups in about two seconds which means 3,600 stirrups per hour with double wire.
Technical data:
| Formula Sapiens |
|
|
|
| Single strand up to: |
6 ÷ 14 mm |
|
#2 ÷ #4 |
| Double strand up to: |
6 ÷ 10 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 70 mm |
|
3/4" ÷ 2 3/4" |
| Max pulling speed: |
144 m/min |
|
475 ft/min |
| Max bending speed: |
1950°/sec |
|
1950°/sec |
| Bending distance: |
1650 mm |
|
5'-5" |
| Average power consumption: |
4 kW/h |
|
4 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Last Updated on Friday, 26 March 2010 12:14 |
|
Friday, 26 March 2010 12:01 |
|
This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 16 mm or double Ø 12 mm. It is equipped with wire inlet unit and offers all the advantages of 'Sapiens technology' and digital servomotors.
Technical data:
| PRIMA 16 |
|
|
|
| Single strand up to: |
6 ÷ 16 mm |
|
#2 ÷ #5 |
| Double strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 100 mm |
|
3/4" ÷ 4" |
| Max pulling speed: |
84 m/min |
|
275 ft/min |
| Max bending speed: |
1258°/sec |
|
1258°/sec |
| Bending distance: |
1650 mm |
|
5'-5" |
| Average power consumption: |
6 kW/h |
|
6 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
|
|
|
|
|
Page 1 of 2 |
Coiled wire processing 
We offer full documentation for all machines. 
You consult with the best