|
Friday, 26 March 2010 12:49 |
|
Eura 16 Dual is a dual-direction bender, with 2 bending heads, apt to manufacture stirrups and rebars with bends at both ends processing both hot and cold-drawn steel in coils, using wires of up to Ø 16 mm or double Ø 12 mm. It is equipped with fixed rebar collecting bench, stirrup collecting flap, wire inlet unit, and Sapiens Technology which makes the straightening system completely automatic. Eura 16 Dual allows producing profiles thanks to an upper operating line where the right-hand bends of the profile are made, and a lower line where the left-hand bends are made.
Technical data:
| EURA 16 Dual |
|
|
|
| Single strand up to: |
6 ÷ 16 mm |
|
#2 ÷ #5 |
| Double strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 100 mm |
|
3/4" ÷ 4" |
| Max pulling speed: |
108 m/min |
|
354 ft/min |
| Max bending speed: |
1680°/sec |
|
1680°/sec |
| Bending distance: |
1615 mm |
|
5'-3" |
| Average power consumption: |
6 kW/h |
|
6 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Last Updated on Friday, 26 March 2010 12:54 |
|
|
Friday, 26 March 2010 12:44 |
|
Eura 16 Bridge Dual is a dual-direction bender, with 2 bending heads, apt to manufacture stirrups and rebars with bends at both ends processing both hot and cold-drawn steel in coils, using wires of up to Ø 16 mm or double Ø 12 mm. It is equipped with 'bridge' rebar collecting bench, stirrup collecting flap, wire inlet unit, and Sapiens Technology which makes the straightening system completely automatic. Eura 16 Bridge Dual allows producing profiles thanks to an upper operating line where the right-hand bends of the profile are made, and a lower line where the left-hand bends are made. The machine's 'bridge' version is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars.
Technical data:
| EURA 16 Bridge Dual |
|
|
|
| Single strand up to: |
6 ÷ 16 mm |
|
#2 ÷ #5 |
| Double strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 100 mm |
|
3/4" ÷ 4" |
| Max pulling speed: |
108 m/min |
|
354 ft/min |
| Max bending speed: |
1680°/sec |
|
1680°/sec |
| Bending distance: |
1790 mm |
|
5'-10" |
| Average power consumption: |
6 kW/h |
|
6 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Friday, 26 March 2010 12:19 |
|
Dual direction stirrup bender to process both hot and cold-drawn steel in coils.
Driven by electrical servomotors, Prima 8 can boast the features described below: speed, reduced power consumption, minimum noise production, it is extremely reliable and consequently maintenance is very inexpensive. Prima 8 is indicated for different uses on top of the traditional rebar processing. Its precision in the processing of very small diameters (down to Ø 3,5 mm - #2), allows the use of this machine in sectors where, reduced spaces, require a high precision during processing.
Technical data:
| PRIMA 8 |
|
|
|
| Single strand up to: |
4 ÷ 8 mm |
|
#2 ÷ #3 |
| Double strand up to: |
4 ÷ 6 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
16 ÷ 32 mm |
|
5/8" ÷ 1 1/4" |
| Max pulling speed: |
110 m/min |
|
360 ft/min |
| Max bending speed: |
1450°/sec |
|
1450°/sec |
| Bending distance: |
1440 mm |
|
4'-8" |
| Average power consumption: |
2 kW/h |
|
2 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Last Updated on Friday, 26 March 2010 12:25 |
91
(2 votes, average 4.00 out of 5)
|
Friday, 26 March 2010 12:16 |
|
Bidirectional automatic stirrup benders to process hot-rolled or cold-drawn coiled wire. They are operated by electric servomotors and they can produce stirrups and cut-to-size bars from wires of ø 12 mm or double ø 10 mm (Prima R). These are the first machines any rebar shop should be equipped with.
Technical data:
| PRIMA 12 R |
|
|
|
| Single strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Double strand up to: |
6 ÷ 10 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 50 mm |
|
3/4" ÷ 1 31/32" |
| Max pulling speed: |
95 m/min |
|
310 ft/min |
| Max bending speed: |
1450°/sec |
|
1450°/sec |
| Bending distance: |
1500 mm |
|
4'-11" |
| Average power consumption: |
3 kW/h |
|
3 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
Friday, 26 March 2010 12:10 |
|
This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 12 mm or double Ø 10 mm. Its main features are the wide front panel and the two servomotors on the driving unit which permit the machine to work at a maximum speed of 144 m/min.
Formula can produce a 200x200 mm stirrups in about two seconds which means 3,600 stirrups per hour with double wire.
Technical data:
| Formula HS |
|
|
|
| Single strand up to: |
6 ÷ 12,7 mm |
|
#2 ÷ #4 |
| Double strand up to: |
6 ÷ 10 mm |
|
#2 ÷ #3 |
| Max.bending angle: |
180° |
|
180° |
| Central mandrels Ø: |
20 ÷ 50 mm |
|
3/4" ÷ 2" |
| Max pulling speed: |
144 m/min |
|
475 ft/min |
| Max bending speed: |
1950°/sec |
|
1950°/sec |
| Bending distance: |
1650 mm |
|
5'-5" |
| Average power consumption: |
4 kW/h |
|
4 kW/h |
| Working pressure: |
7 bar |
|
90/100 psi |
|
|
|
|
|
|
|
Page 1 of 3 |
Coiled wire processing
We offer full documentation for all machines. 
You consult with the best